Icon	Command	Description
	New	New input
	Open	Open an existing file
	Close	Close an opened file
	Save	Save the input data in a file
	Save as	Save the input data in another (copy) file
	Print preview	Make a print preview on screen
	Print	Print the calculation
	RTF output	Save the output in RTF format (MS-Word)
	PDF output	Save the output in PDF format
	Exit	The program is closed

Geometry

Icon	Command	Description
	Member	Entering members. See Members
	Node	Entering nodes. See Nodes
	Hinge	Hinged support. See Supports
	Roller support z-direction	Roller support in z-direction
	Roller support x-direction	Roller support in x-direction
	Full fixity	Full fixity
	Spring support x-direction	Spring support in x-direction. Translation spring in x-direction.
	Spring support z-direction	Spring support in z-direction. Translation spring in z-direction.
	Spring support about y-axis	Spring support about the y-axis. Rotation spring about the y-axis.
	Hinge in member	Hinge in a member. With this you can enter a Gerber beam simply and quickly.

Load

Icon	Command	Description
	q-load	Uniformly distributed member load or a linearly varying member load (for example a triangular load). See Member loads
	F-load	Point load on a member.
	M-load	Moment load on a member
	Node load	Load on a node. (Fx force in x-direction, Fz force in z-direction and/or My moment about the y-axis). See Node loads
	Node displacement	Prescribed displacement of the node. (dx displacement in x-direction, dz displacement in z-direction and/or dr rotation about the y-axis). See Node displacements

Icon	Command	Description
	Undo	Undo an operation. All operations are stored internally. With this function one or more operations can be undone. There is no limit to the number of steps that can be gone back.
	Redo	Redo an operation
	Select	Set the mode to: Select. In this mode you can select (make active) an element in the graphical screen.

Icon	Command	Description
	Zoom window	Set the mode to: zoom in on a window. This function is used to zoom in on a certain part of your structure. Method: with the left mouse button pressed you drag a rectangular window from bottom left to top right. The mode is switched off automatically after zooming in.
	Pan	With pan you can shift / drag the drawing of a zoomed part. Other parts of the structure then come into view.
	Zoom extents	Set the mode to: zoom extents. This function is used to show everything. The mode is switched off automatically after zooming out.
	Previous view	With zoom window you can, if required, zoom in on a part of your structure in several steps. With the function previous view you go back one step.

Icon	Command	Description
	Measure distance	Set the mode to: measure distance. In this mode distances can be measured. The mode is not switched off. Method: select the start point, using the snap function. With the left mouse button pressed you move to another known point. While you keep the left mouse button pressed a dimension line is drawn and a small window appears in which the distances dL, dy and dz are displayed in mm.
	Settings	Adjusting the settings. (see Settings)
	Demos	Dialog box with a choice of different demos.

Icon	Command	Description
	Help	Open the help file
	Info	Information regarding the application and the licence data.